Graphic Module 128x64

VG128648

1.Built-in controller ST7920
  (128x64 dots matrix mode or 16x16 dots Big5/GB
  Chinese mode, or 8x16 dots ASCII mode)
2.+ 5V single power supply (+3V option)
3.1/32 duty cycle
4.LED B/L pins: A/K, or 1/2, 15/16
5.Backlight: LED B/L

Prev Next
  • Graphic Module 128x64 - VG128648
  • Mechanical Data
  • Electronic Characteristics
  • Pin Assignment
  • Dimension
Item Standard Value Unit
Module Dimension 75.0 x 50.3 mm
Viewing Area 60.0 x 32.6 mm
Active Area 55.0 x 27.48 mm
Dot Size 0.39 x 0.39 mm
Dot Pitch 0.43 x 0.43 mm
Item Symbol Condition Typical Value Unit
Input Voltage VDD 25 ℃ 5.0 V
Supply Current IDD VDD = +5V 2.6 mA
LCD Driving Voltage VDD - VO 25 ℃ 6.0 V
LED Forward Voltage Vf 25 ℃ 4.2 V
LED Forward Current If 25 ℃ (Edge) 100 mA
Pin Symbol Function
1 VSS GND
2 VDD +5V(+3V option)
3 VO Contrast Adjustment
4 RS Register selection signal
5 R/W H/L read/write signal
6 E H→L Enable signal
7~14 DB0~DB7 H/L data bus line
15 A Power supply for B/L (+)
16 K Power supply for B/L (-)
17 /RST Reset signal
18 VOUT Positive Voltage output

VG128648

Back
Top